2. Press the right key to highlight the Record lock selection, and press either the up or down key to show the password menu,
then follow the instructions in steps 5 to 7 above.
DST (daylight saving time)
The DST function provides advance programming of the date and time for the next DST adjustment.
1. Use the cursor keys to highlight the DST option.
2. Press the right cursor key to highlight the DST selection.
3. Use the up or down cursor keys to bring up the Daylight saving menu (Shown right).
4. Use the up or down cursor keys to highlight the option to be changed.
5. Press the right cursor key to highlight the DST selection to be changed.
6. Use the cursor keys to edit the date field, this will be in the date format set in the Time, Date and Language menu.
7. Press the right cursor key to move to the time field and use the cursor keys to set the time the change is to happen.
Factory Default
WARNING: The
FULL SYSTEM RESET
previously defined settings will be discarded.
To reset system, press and
The Factory default option is used to clear the multiplexer of all user defined settings. On
hold CAM1 for
5 seconds
selecting the reset option, the reset instructions are displayed, as shown left.
Press MODE to exit
Press and hold
without resetting
cancel the operation.
24
System Options
will return the unit to the factory settings. All
FULL SYSTEM RESET
key for 5 seconds to reset the unit or press the
CAMERA 1
Daylight saving
DST
Off
DST spring
00/00
00:00
DST autumn
00/00
00:00
Press MODE when done
key to
MODE/MENU
Version 1.0