Dedicated Micros system sprite Guia Del Usuario página 21

To set up the c-bus Alarm module for keyswitch operation:
Note: The keyswitch contact can be wired into any of the 16 inputs of a c-bus alarm module.
1. Select the Keyswitch option in the activity detection or alarm mode.
2. Use the left or right cursor keys to highlight the module or contact to change.
3. Use the up and down cursor keys to change the module or contact number.
Refer to the Alarm module manual for connection details.
For example, if the keyswitch was wired into input 16 on alarm module 1, this option would be setup as":
Module 1 Contact 16.
Enabling the alarms and activity detection between certain times:
1. Select the On between option in the activity detection or alarm mode.
2. Use the left or right cursor keys to highlight the digits to be changed.
3. Use the up and down cursor keys to change the digits. Ensure the time is in 24 Hour format (HH:MM).
For example, to enable alarms at 18:30 (6:30pm) until 07:30 (7:30 am) this option would be setup as:
On between 18:30 and 07:30.
Version 1.0 Detection Periods 17