6. Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether Adjuster
Strap to tighten.
CHECK YOUR WORK
• HOLD Child Restraint at each side near Forward-Facing Belt Paths. Pull side to
side and forward. Child Restraint should not move more than 1 in. (2.5 cm) from
vehicle seat back or side-to-side.
• Make sure ball is in red zone for forward-facing use (p. 41-42). If
necessary, loosen the LATCH and Tether Straps, readjust recline and repeat
installation steps to make sure Child Restraint is installed properly.
• Check installation before every use.
INSTALL FORWARD-FACING USING LATCH
6
CLICK!
46