3. Place Child Restraint rear-facing on selected vehicle seat. Make sure it is not
blocking the vehicle belt buckle.
4. Installation on Level Ground: Locate the Level Indicator label and readjust the
seat recline to any position that the ball falls within the blue zone for
REAR-FACING
5. Installation on a Slope: Locate the Level Line on the blue label near the
Rear-Facing Belt Path. Adjust the seat recline so that the Level Line is level
with the ground.
Installation Options:
* LATCH installation
continued on page 33.
* Lap/Shoulder Belt installation
continued on page 37.
* Lap Belt Only installation
continued on page 39.
REAR-FACING SETUP
installation.
3
5
4
32