INSTALL FORWARD-FACING USING LAP/SHOULDER BELT
4. While pushing down on the Child Restraint
tighten the vehicle lap belt.
5. Continue to pull on the vehicle shoulder belt and position the shoulder belt in the
middle of the Lock-Off area. Lock-Off will not function properly if the vehicle belt
is not positioned properly. Reattach Seat Cover.
6. Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether Adjuster
Strap to tighten.
CHECK YOUR WORK
• HOLD Child Restraint at each side near Forward-Facing Belt Paths. Pull side to
side and forward. Child Restraint should not move more than 1 in. (2.5 cm) from
vehicle seat back or side-to-side.
• Make sure ball is between lines on label for forward-facing use (p. 41-42).
If necessary, loosen the vehicle belt and Tether, readjust recline and repeat
installation steps to make sure Child Restraint is installed properly.
• Check installation
before every use.
a
4
b
, pull the vehicle shoulder belt
a
5
Place belt here.
to
b
6
CLICK!
48