Setting The Configuration; Patient Id Configuration; Patient Id Enable/Disable - Abbott ALERE AFINION AS100 Manual Del Usuario

Setting the configuration

Before using your Alere Afinion AS100 Analyzer you should set the configuration according to your needs. To enter the
configuration menu, do the following:
Start-up menu
1
Touch
2
Main menu
Touch
3
Configuration menu
Select an item for configuration (see following pages).

Patient ID configuration

Patient ID enable/disable

The patient identification (ID) function can be enabled or disabled. The patient ID function is enabled as a default setting by the
manufacturer. When the patient ID function is enabled, the patient ID must be entered for each Test Cartridge to be analysed. If the
patient ID function is disabled, a run number will automatically replace the patient ID and be displayed in the upper left corner of the
screen. This numbering is reset each day at midnight.
Touch in the configuration menu to enter the patient ID on/off option.
Select
Select
Touch
to enter main menu.
to enter configuration menu.
to disable the patient ID function.
to enable the patient ID function.
to accept and return to the configuration menu.
Configuration
EN | 13