B Trim - Denon DN-S3500 Instrucciones De Operación

ENGLISH
Stutter
• A1 and A2 points can be also used for
Stutter playback.
t To enable stutter playback,
push FLIP button for A1/A2
6
buttons, then " " display
turns off.
Press the FLIP button to
switch between the Hot
Start/Seamless Loop and Stutter modes.
Clear the A1/A2 point
y While pressing the FLIP/(CLR) button, push
the A1 or A2 button to clear the
corresponding A and B points.
Or push the FLIP button for more than 1
sec to clear both A1 and A2 points at once.
Quickly pressing the "FLIP" button first
7
and then A1, A2 or B buttons will clear
these points individually.
CLR
A1
FLIP
CLR
FLIP

B TRIM

9
• The Seamless Loop and Sampler B points can be fine-adjusted using the Scratch Disc.
• Trim the points during loop playback as a rehearsal.
r q e
CLR B TRIM
REV. V V PITCH/V / / OL.
T O
T. T T ET
ECHO/LOOP
B Trim
Seamless Loop:
q When the B TRIM button is
pressed during seamless
loop playback, the B TRIM
mode is turned on.
To cancel B TRIM mode,
1 press the B TRIM button again.
Sampler Loop:
q When
the PITCH/VOL.
button is pressed for more
than 0.5 sec during Sampler
Loop playback, the B TRIM
mode is turned on.
Select B point
w The A button illumination
automatically flashes for the
last loop created or
2
accessed.
• Press button A1 or A2.
The loop whose B point is to be adjusted is
selected.
10
ENGLISH
w, r
A2
B TRIM
CONT. T T
RELAY A A
PARAMETER P P S
PUSH ON/OFF
Trim B point
e Turn Scratch Disc slowly to
B TRIM
move the B point 1 frame
at a time.
• Range for trimming B point is limited as
follows.
B point for Loop:
3
Between 5 frames after A point and
B TRIM disc end.
B point for Sampler:
PITCH/VOL.
Between 5 frames after A point and
Sampler end.
*MP3
Between 5 frames after A point and file
end.
A1 Save the B point
r Push the A or SAMP button
4 again to save new B point,
and the unit automatically
exits from the B Trim mode.
q
B
EXIT/
RELOOP
FILE SEARCH
MODE
A1