Auto Bpm Counter/Effector - Denon DN-S3500 Instrucciones De Operación

ENGLISH

AUTO BPM COUNTER/EFFECTOR

11
AUTO BPM COUNTER
REV. V V PITCH/V / / OL.
q, w, e, t
ECHO/LOOP
FLANGER
AUTO BPM COUNTER
Beats per minute (BPM) of a track is measured automatically and displayed during playback or in Cue
standby mode.
Measured BPM values are synchronized with the effector parameters such as:(ECHO/LOOP and FLANGER
time)
• When Auto BPM COUNTER is off, pushing the TAP button for 1 second, reactivates the AUTO BPM
COUNTER to turn back on.
• If you change or select a new track, the old BPM is cleared and the Auto BPM Counter starts to detect
the new track automatically.
NOTE:
AUTO BPM COUNTER might not me able to be measured correctly according to the type of music.
*If this happens, please use the TAP feature.
BPM LOCK
The data measured by the
auto BPM counter is locked.
1 q Push the TAP button once
while auto BPM counter is
operating.
"BPM Lock" is displayed for 1 second.
TAPPING
The interval when the TAP button is pushed
repeatedly is measured and BPM is calculated.
w When you push the TAP
button, the auto BPM
2
counter turns off.
Push the TAP button
repeatedly about 5~10
times according to the
beat.
B TRIM
CONT. T T
T O
T. T T ET RELAY A A
PARAMETER P P S
PUSH ON/OFF
MANUAL INPUT
The known BPM can be dialed in directly by the
numerical value.
TAP
e The BPM manual input mode is available
when the TAP button is pushed for more
than 2 sec. "Manual In" is displayed is the
character display.
r You can input BPM value
directly with the EFFECTS
3
knob.
TAP t When the TAP button is
pushed again, the BPM
manual input mode is
saved and the BPM is
locked to that value for
that Track.
EFFECTOR
One of the 7 effects can be selected.
EXIT/
RELOOP
w, t, i
FILE SEARCH
MODE
r
q, e
r, y
F F H
u, o
ECHO/LOOP
ECHO/LOOP ON
q When
the
button is pressed, the
1
-1
echo/loop function is turned
on.
Set the parameters
w The echo/loop parameters can be selected
with EFFECTS knob and PARAMETERS
knob.
Echo Feedback number:
Turn the EFFECTS knob.
*1 The Echo Feedback
number is displayed in
the playback position
indicators.
Echo Time:
Turn the PARAMETERS knob.
1
-2
*2 The Echo time is displayed in the
EFFECTS
character display.
DRY WET
• When the EFFECTS knob is pressed, the
TAP
parameter display is swited to the normal
display.
• To return to the parameter display, press
or turn the EFFECTS knob.
12
ENGLISH
*1
T. T T ET
*3
*5
ECHO/LOOP
FLANGER
O
FILTE L L R
ET
Select the LOOP mode
When the feedback number is set to the
maximum, loop playback with the specified
time begins. Other tracks can be selected or
ECHO/LOOP
ECHO/LOOP
the disc can be replaced for seamless play.
ECHO LOOP FADE OUT
• The parameter mode is turned off while the
echo loop is playing when the back cue or
NEXT TRACK is selected at the parameter
1 selection mode.
-3
• When the new track is selected and playback
is started, echo loop playback stops by fade
out. An echo loop playback and a normal
playback can be smoothly replaced.
• The disc can also be ejected during Echo
EFFECTS
Loop and replaced with a new disc without
interrupting the sound. Once a new track is
DRY WET selected and PLAY is pushed, the echo loop
starts to automatically fade out.
ECHO/LOOP OFF
e If the ECHO/LOOP button
1
is pressed
-4
echo/loop function is turned
off.
PARAMETERS
PUSH ON/OFF
• ECHO LOOP mode can be used in many ways for
advanced remixing. For example, during ECHO LOOP
TRACK SEARCH you can shorten the original feedback time to chop
the beats in half each time the PARAMETERS knob is
turned counter clockwise. Once the minimun
feedback time of 1/8 (or other) is reached, you can
push down the PARAMETERS knob to instantly return
back to the original ECHO LOOP sound. For even
more creative control, the Pitch Slider and Key Adjust
are functional with ECHO LOOP after it has been set.
*2
*4
*6
CO
RE
P
ECHO/LOOP
again, the