The Built-In Supporting Legs - Sola NS PLUS 2311 Manual Del Usuario

5.7 THE BUILT-IN SUPPORTING LEGS

The machine has two built-in supporting legs to prevent it from falling back
during the uncoupling manoeuvre.
Before starting work with the machine, RAISE THESE SUPPORTS.
WORKING WHILE THE SUPPORTS
ARE IN PLACE MAY CAUSE DAMA-
GES TO THE MACHINE.
Before raising the supporting legs,
THE MACHINE MUST BE RAISED
to make the operation easier and
prevent the machine from falling
backwards.
1-
Remove the safety ring (1, fig. 28).
2-
Remove the securing bolt (2, fig. 28).
3- Shift the support upwards.
4-
Align the 2 holes and place the
securing bolt (2, fig. 29).
5-
Place the safety ring again. (1,
fig. 29).
1
1
31
STARTING
Fig. 27 Fig. 27
2
Fig. 28 Fig. 28
2
Fig. 29 Fig. 29