Fan Rpm / Fan Alarms - C4 - Sola NS PLUS 2311 Manual Del Usuario

10.6 FAN RPM / FAN ALARMS – C4
To display the fan's speed in rpm
Select channel 4 using the central button
Fan alarms
The fan's minimum turning speed can be programmed.
Under 2 Km/h these alarms will deactivate.
Fan's minimum speed
1. Select channel 4.
2. Press and hold
3. Hold it and press the
former cases. Default speed is 3800 rpm.
4. Release all buttons to resume the normal position.
Selecting the fan's number of impulses per revolution (default value is set to 2).
PLEASE NOTE
FAN'S NUMBER OF IMPULSES PER REVOLUTION SHOULD ALWAYS BE 2.
ONLY USE THIS PROGRAMMING MODE IN CASE OF MALFUNCTION.
1. TO SELECT PROGRAMMING MODE 2, PRESS
OR (MONITOR NEUMASEM PLUS) BUTTON WHILE SWITCHING ON
THE SCREEN USING REAR SWITCH.
0/1
Ha
2. PRESS
PLUS)" TO CHANGE THE CHANNEL AND SELECT CHANNEL 4 (FAN).
3. PRESS AND HOLD THE
SHOULD ALWAYS BE 2).
4. RELEASE THE BUTTON TO CHANGE BACK TO NORMAL POSITION.
button for more than 5 seconds.
to change value and digits as explained in
0
(MONITOR NEUMASEM) OR
.
0/1
Ha 0
(MONITOR NEUMASEM)
(MONITOR NEUMASEM
TO MODIFY THE FLICKERING DIGIT (IT
71
ELECTRONICAL CONTROLLER