Sola NS PLUS 2311 Manual Del Usuario página 37

4- Place the clip pin of the air outlet to fan (8, fig. 38-39) at position F (fine seed).
Fan in machines up to 5 metres
length.
8
5- Turn the spindle (4, fig. 37) to adjust dosing between 0 and 25.
6- Pull the pinion gear nº10 until it
is released from the pinion gear
nº11 and fit it into pinion gear nº12
(fig. 40).
7- Once the seed distributor is set
in position F (microdosing), the
ELECTRONICAL CONTROLLER
needs to be configured (see page
54, working in micro mode).
The aim of microdosing is to better
distribute both fine and regular
seeds in small numbers.
The correct value for using microdosing F-system in fine seeds can be found
in the dosing tables (see section 12 - DOSAGE TABLES).
CHECK THE CLEANING BRUSH IS IN GOOD CONDITION BEFORE BEGINING
TO SOW FINE SEEDS.
WHEN MICRODOSING FINE SEEDS, DO NOT EXCEED NUMBER 25 IN AD-
JUSTING SCALE (2, FIG.37) .
Fan in machines of 6 metres
length.
Fig. 38 Fig. 38
12
37
DOSAGE
Fig. 39 Fig. 39
Fig. 40 Fig. 40
10
8
11