Setting The Date And Time; Costing Parameters - Jusan TAX-LINE Manual Del Usaurio

Press ENTER. The following screen appears:
LANGUAGE
Language: ENGLISH
Use the << and >> keys to select the language and confirm by pressing ENTER.

12.1 Setting the date and time

The following screen appears:
DATE AND TIME
1.Date: 01/01/00
2.Time: 00:00
• Press 1, enter the current date and confirm by pressing ENTER.
• Press 2, enter the current time and confirm by pressing ENTER.
• Press O.K. to go to the next screen.
Note:
It is important that the dates in the unit and in the PBX are the same.

12.2 Costing parameters

COSTING PARAMETERS
1.COSTING:
2.TEL.:
3. PREFIX:
• Press 1 "Costing", select the costing mode by pressing the << and >> keys and
confirm with ENTER.
DURATION Mode: For costing according to duration and destination.
PULSES Mode:
MIXED Mode:
• Press 2 "Tel." enter the telephone number of the installation site and confirm with
ENTER. This is the number which must be dialled to call the installation site from a
phone located in the same zone. In the case of countries with a national number,
enter the full number.
Mixed
914560110
For costing according to meter pulses.
For a combination of the two previous modes. The unit will use
meter pulses if different from 0, and otherwise calculate the
cost according to duration and destination.
25
INSTALLATION