Setting The Date And Time; Modifying The Password; Selecting The Language - Jusan TAX-LINE Manual Del Usaurio

9. Check-in:
0. DCC Param.: Parameter for the system´s use.

15.5 Setting the date and time

...
...
3. Configuration
4. System Status
Enter the current date (dd/mm/yy) and confirm by pressing ENTER.
Enter the time (hh:mm) and confirm by pressing ENTER. Press OK to validate.
The unit is equipped with a real time clock powered by a battery, which sustains the
date and time in the case of a mains failure.
The main menu permanently displays the date and time.

15.6 Modifying the password

...
...
3. Configuration
4. System Status
The initial password is 9. It may be replaced by any combination of up to 8 digits.
Enter the new password, press ENTER. Check the password by entering it again and
confirm with ENTER. The new password is now registered.
• The password is always required to access the Configuration menu.
• If you want to protect the access to the configuration menu, make sure to exit
using option 8. Close configuration, rather than CANCEL or O.K. keys, which
will not lock the Configuration menu.

15.7 Selecting the language

...
...
3. Configuration
4. System Status
The unit may be operated in various languages including: English, French, Spanish,
German, Italian, and Portuguese.
only blocks the extension in the case of a PABX interactive Check-
in/Check-out.
This is the Auto check-in parameter. If its value is YES, each time
an extension is checked-out, the same extension is automatically
checked-in. If the value is NO the extension must be manually
checked-in on arrival of the next guest.
...
3. Costing
4. PBX
5. Date and Time
···
...
4. PBX
5. Date and Time
6. Password
···
...
5. Date and Time
6. Password
7. Language
···
44
PROGRAMMING