Belkin N1 Vision Manual Del Usuario página 103

Troubleshooting
I am having difficulty setting up Wireless Protected Access (WPA)
security on a Belkin wireless client card for a home network.
Clients must use the same key that the N1 Vision uses. For instance, if the
key is "Smith Family Network Key" in the N1 Vision, the clients must also use
that same key.
1. Double-click the Signal Indicator icon to bring up the "Wireless
Network" screen. The "Advanced" button will allow you to view and
configure more options of your card.
2. Once the "Advanced" button is clicked, the Belkin Wireless Utility will
appear. This Utility will allow you to manage all the advanced features of
the Belkin Wireless Card.
3. Under the "Wireless Network Properties" tab, select a network name
from the "Available Networks" list and click the "Properties" button.
4. Under "Network Authentication", select "WPA-PSK (no server).
5. Type your WPA key in the "Network key" box.
Important: WPA-PSK is a mixture of numbers and letters from A-Z and
0-9. For WPA-PSK you can enter eight to 63 characters. This network
key needs to match the key you assign to your N1 Vision.
6. Click "OK, then "Apply" to save the settings.
101
1
2
3
4
5
6
7
8
9
10