Belkin N1 Vision Manual Del Usuario página 53

Using the Web-Based
Advanced User Interface
Using the Bandwidth Switch – This switch allows you to set the N1
Vision's wireless bandwidth modes. There are several modes available:
1) 20MHz only – Setting the N1 Vision to this mode allows only 20MHz
operation. This mode is compatible with N1, draft 802.11n-, 802.11g-
, and 802.11b-compliant devices, but will limit N1, draft 802.11n-
compliant devices' bandwidth by half. Reducing bandwidth to
20MHz-only operation might solve some wireless problems.
2) 20MHz/40MHz Auto – Setting the N1 Vision to this mode allows it
to switch automatically between 20MHz and 40MHz operation. This
mode enables 40MHz operation, to maximize speed for N1, draft
802.11n-compliant devices when conditions permit. When a legacy
802.11g access point is presented and occupies an adjacent secondary
channel, the N1 Vision automatically reverts to 20MHz operation to
maximize compatibility. We recommend using this as the default mode.
51
1
2
3
4
5
6
7
8
9
10