Belkin N1 Vision Manual Del Usuario página 88

Manually Configuring Network Settings
Manually Configuring Network Settings
in Windows 2000, NT
1. Click "Start", "Settings", then "Control Panel".
2. Double-click on the "Network and dial-up connections" icon (Windows 2000)
or the "Network" icon (Windows XP).
3. Right-click on the "Local Area Connection" associated with your network
adapter and select "Properties" from the drop-down menu.
4. In the "Local Area Connection Properties" window, click "Internet Protocol
(TCP/IP)" and click the "Properties" button. The following screen will appear:
(1)
(2)
(3)
5. If "Use the following IP address" (2) is selected, your N1 Vision will need to be
set up for a static IP connection type. Write the address information the table
below. You will need to enter this information into the N1 Vision.
6. If not already selected, select "Obtain an IP address automatically" (1) and
"Obtain DNS server address automatically" (3). Click "OK".
Your network settings are now configured for use with the N1 Vision.
, or XP
®
86