Belkin N1 Vision Manual Del Usuario página 6

Introduction
3. Cordless Phones – If the performance of your
wireless network is impaired after attending to the
above issues, and you have a cordless phone:
• Try moving cordless phones away from your N1
Vision and your wireless-enabled computers.
• Unplug and remove the battery from any cordless phone that
operates on the 2.4GHz band (check manufacturer's information).
If this fixes the problem, your phone may be interfering.
• If your phone supports channel selection, change the channel on
the phone to the farthest channel from your wireless network. For
example, change the phone to channel 1 and move your N1 Vision to
channel 11. See your phone's user manual for detailed instructions.
• If necessary, consider switching to a
900MHz or 5GHz cordless phone.
4. Choose the "Quietest" Channel for your Wireless Network –
In locations where homes or offices are close together, such
as apartment buildings or office complexes, there may be
wireless networks nearby that can conflict with yours.
Use the Site Survey capabilities found in the Wireless Utility of your
wireless adapter to locate any other wireless networks that are available
(see your wireless adapter's user manual), and move your N1 Vision and
computers to a channel as far away from other networks as possible.
• Experiment with more than one of the available channels, in
order to find the clearest connection and avoid interference
from neighboring cordless phones or other wireless devices.
• For Belkin wireless networking products, use the
detailed Site Survey and wireless channel information
included with your wireless network card. See your
network card's user guide for more information.
These guidelines should allow you to cover the maximum possible area
with your N1 Vision. Should you need to cover an even wider area, we
suggest the Belkin Wireless Range Extender/Access Point.
4