4- Preparation And Assembly At Receiving; Feeding Tube Assembly; Discharge Tube Assembly - JF 40 MAXXIUM Manual Técnico De Operación

4- Preparation and assembly at receiving

4.1- Feeding tube assembly

Install the feeding tube on the inlet tube and fasten it
through pin (1) and cotterpin (2) and place the fixing bolt
at the bottom of the chute the discharge tube, as the
figure.

4.2- Discharge tube assembly

Install the discharge tube on the frame and fasten it
through bolts with springs (3), that fasten nuts and
counternuts (4).
Fasten the sufficient to do possible rotate the assembly.
After install and fasten the bolts, adjust discharge tube
position rotating it as shows the figure at right.
16
2
1
3
4