Seat; Helmet Holder - Honda NX4 Falcon Manual Del Propietário

32

Seat

To remove the seat (1), insert the ignition key (2) into
the seat lock (3) and turn it clockwise. Pull the seat
back and up.
To install the seat, insert the prong (4) into the recess
(5). Push forward and then down on the rear of the
seat.
Be sure the seat is locked securely in position after
installation.
(1) (5)
(4)
(5) (4)
(1) Seat
(3)
(2) Ignition key
(3) Seat lock
(4) Prong
(5) Recess
(2)

Helmet Holder

The helmet holder is located below the seat.
To use the helmet holder, remove the seat.
Route the helmet holder cable (1) through the helmet
D-ring (2) and hook the loops of the holder cable onto
the helmet holder hook (3).
Install the seat.
(1)
(3)
(1)
WARNING
!
Riding with a helmet attached to the holder can
interfere with the rear wheel or suspension and
could cause a crash in which you can be seriously
hurt or killed.
Use the helmet holder only while parked. Do not ride
with a helmet secured by the holder.
Owner´s Manual
(1) Helmet holder cable
(2) D-ring
(3) Helmet holder hook
(2)