Honda NX4 Falcon Manual Del Propietário página 140

Owner´s Manual
Wear Inspection
Check the chain wear label when adjusting the chain. If
the red zone (6) on the label aligns with the arrow mark
(7) on the chain adjuster plates after the chain has
been adjusted to the proper slack, the chain is
excessively worn and must be replaced. The proper
slack is:
35 – 45 mm (1.4 – 1.8 in)
Damage to the bottom part of the frame may be
caused by excessive drive chain slack of more than:
60 mm (2.4 in)
Replacement chain
D.I.D. 520VD
This motorcycle has a staked master link drive chain
which requires a special tool for cutting and staking.
Do not use an ordinary master link with this chain. See
your Honda dealer.
(6)
(7)
59
(6) Red zone
(7) Arrow mark