GG Bag-in-Box BBF10 Traducción Del Manual De Instrucciones Original página 57

Digital button for the adjustment and display of the vacuum (37)
The button displays, how much vacuum is required before the filling of the bag until the filling
process begins. The switching output of the button is only active, when vacuum is set to automatic
(see operator display). The set value can be changed using the control keys of the button as
follows:
- Remove protective cover.
- Press the blue key until P1 appears.
50 kPa ≙ 500 mbar).
- Now you can adjust the set value using the grey up/down keys (standard -
- After setting the required value, please reattach the protective cover to the
button (37).
Selector Cleaning (38)
The selector Cleaning turns the machine into cleaning mode when the selector is turned clockwise.
After fitting the cleaning adaptor, the swivel block (31) moves left and down. The filler valve (34)
opens and the pump begins to run.
EMERGENCY-OFF SWITCH (40)
Operating the EMERGENCY-OFF SWITCH stops the machine, e.g. the machine stops in the
current position, the filling program is cancelled and it waits until the EMERGENCY-OFF SWITCH
is unlocked.
Unlocking the EMERGENCY-OFF button (41)
This button is required to unlock the machine unto operating the EMERGENCY-OFF SWITCH (40).
At the same time, the start screen of the operating display is shown (24).
Button circulation (42)
This button is used to start the circulation process. The pump start running but the filling valve (34)
remains closed. This created a circle leading back to the buffer tank via the circulation pipe. This is
necessary, if the machine, for instance, is stopped for a longer period and the filling medium has
cooled down or if the temperature control shows that the temperature is too low.
Translation of the original operating instructions Bag-in-Box Filler BBF10 & BBF14
10.07.2017
Operation
57 of 123
English