Operation Of Efas - Company Representatives; Registration And Deregistration Of Company; Automatic Setting Of Activity After Ignition Off/On - intellic EFAS Manual De Instrucciones

6 Operation of EFAS – Company Representatives
The company card is used for downloads or printouts of the data that is stored in the digital tachograph.
Furthermore, the activity for driver and co-driver after the ignition is turned on/off can be defined to be set
automatically.
It is possible to print or download the data that was stored while your company was registered on the
digital tachograph. When registering your company on the digital tachograph, a company lock is acti-
vated. This company lock prevents other companies from reading out or displaying the data stored for
your drivers.
6.1

Registration and Deregistration of Company

If no other company is registered on the digital tachograph, your company will
be registered automatically, when you insert the company card into the digital
tachograph.
If your company was registered before, the following information is displayed.
If another company is registered
Company Locks Request?.
If you select YES, the other company is deregistered and your company is registered. If you select NO,
you have access only to data that had already been allocated to your company.
If you rejected the automatic registration after insertion of the company card, you may switch on the
company lock as follows:
OK
Settings Company Locks
In order to deactivate the company lock, select
OK
Settings Company Locks
and confirm the lock-out with OK.
6.2

Automatic Setting of Activity after Ignition OFF/ON

In the modes COMPANY and CALIBRATION, by using the function "Activity Ignition", the activity can be
selected which will be automatically set for the driver and/or co-driver after the ignition is turned on/off.
This function may be deactivated, i.e. when the ignition is turned on/off, the current setting of the activity
for driver/co-driver is maintained.
Select OK
Settings
The current setting for the driver at Ignition ON is displayed. Use control keys to change into one of
the following settings:
Maintain driver activity
Driver in rest period
Driver in work period
Driver in availability period
13
The display indicates when the last download of the driver card data (driver
card reader slot /slot 1) occurred. (This information is read from the card).
Control key ( pressed once:
Display of the download time of the driver card data.
Control key pressed twice:
Display of the card holder's surname.
,
the display shows the following screen
Lock-in, confirm with OK.
lock-out
Activity Ignition ON/OFF