Display Contrast; Acoustic Signals (Tones); Time And Date - intellic EFAS Manual De Instrucciones

Select OK
1.
Settings
brightness setting is displayed.
2. Use control keys
OK.
Day setting:
10.2.3

Display Contrast

Select OK
1.
Settings
The current display contrast setting is displayed.
2. Use control keys
10.2.4 Keyboard Backlight Brightness
Select OK
1.
Settings
current brightness setting of the keyboard backlight is displayed.
2. Use control keys
Day setting:
10.2.5 Distance and Speed Unit Display
This function is used to determine the unit that shall be used for displaying the distance. You can select
either kilometres or miles. The unit for displaying the speed (km/h or mph) changes automatically.
Select OK
1.
Settings
current distance unit setting is displayed.
2. Use control keys
choice with OK.
10.3

Acoustic Signals (Tones)

You can use these menu functions to change the settings for key click, notification tone, warning tone.
Select OK
1.
settings
The current key click setting is displayed.
2. Use control keys
choice with OK.
Set the notification tone and warning tone accordingly.
10.4

Time and Date

Use this menu item and its respective menu sub-items to correct the time, set the time zone, acti-
vate/deactivate the automatic switch to daylight savings time, display Universal Time Coordinated UTC,
change the format of the date display and time format (12h/24h).
Due to legal restrictions the time can only be changed fully in calibration mode by using a workshop card.
Without a workshop card, the time can only be changed by one minute every seven days, and the date
cannot be changed at all.
Select OK
1.
Settings
If you have already corrected the time within the last seven days, the time cannot be changed and a
message is displayed to you. Otherwise, the following display appears:
2. Use control keys
The new corrected time is displayed.
17
Brightness. The current
Display
and to select the required brightness. Press
Display Contrast.
to select the required contrast. Press OK.
and
Keyb.brightness. The
Display
to select the required brightness. Press OK.
and
Distance unit. The
Display
and to select the required unit. Confirm your
Tones Key click.
and to select the required setting. Confirm your
Clock Time adjustment.
to make the required correction. Press OK.
and
Night setting:
Night setting: