Operation; Display And Controls; Working With Menus - intellic EFAS Manual De Instrucciones

2

Operation

2.1

Display and Controls

The digital tachograph EFAS features the following display elements and controls:
1 Service interface cover (cap)
2 Red warning light to display the operating mode
Display
Red
Off
Permanently red
Flashing red
Flashing red 2x
3 Alphanumeric display
4 Key 1 for the driver (driver 1)
short push = adjusting of the activity, push longer = card withdrawal
5 Backspace
6 Card slot for the driver's tachograph card
7 Control key
8 Control key
Key OK (invoke menu, confirm)
9
Key 2 for the co-driver (driver 2)
10
short push = adjusting of the activity, push longer = card withdrawal
11 Card slot for the co-driver's tachograph card (vehicle operated in team mode)
12 Integrated printer module (for inserting a new reel of paper see „EFAS Quickstart")
2.2

Working with menus

Press OK. The main menu is displayed.
1.
2. Use control keys
Press OK to acknowledge your choice.
3.
The next submenu is displayed.
4. Repeat step 2 and 3 until you reach the required setting.
5. Key is used to return to the next higher menu level.
Meaning
The warning light flashes upon activation (functional check).
EFAS is ready for operation.
System error occurred. Have your EFAS checked by a workshop.
Warning. Acknowledge the warning with OK.
Incorrect entry. Correct your entry.
(backspace & clear, cancel)
(backward / previous entry)
(forward / next entry)
and to select the required menu.
4