GiBiDi SC230 Manual De Instrucciones página 11

SC230
ELECTRICAL CONNECTIONS: FASTONS
Position Signal Description
1 CN2 CN3 Ground connection
2 CN4 CN5 Motor capacitor connection
ELECTRICAL CONNECTIONS: TERMINAL BOARDS
Terminal Position
1
M1
2 NEUTR
3
4
M2 5
6
7
8
9
10 PHOTO
M3
11 SAFETY
12
13
14
15
24 VAC
16
M4
WARNING
17
18
19
20
M5
21
PROTECTION FUSES
Position Value Type
F1 500 mA FAST
F2 3,15A FAST
F3 500 mA FAST
Signal Description
PHASE 230 VAC power supply
230 VAC power supply
Flashlight output 230 VAC 40W
LAMP
LAMP Flashlight output 230 VAC 40W
COM Motor common
OPEN Motor connection (opening)
CLOSE Motor connection (closing)
PED PEDESTRIAN input (N.O.)
START START input (N.O.)
PHOTOCELL input (N.C.). If not used, jumper with terminal 13
SAFETY DEVICE input (N.C.). If not used, jumper with terminal 13
STOP STOP input (N.C.). If not used, jumper with terminal 13 or set dip switch 10 to ON
COM COMMON INPUTS/OUTPUTS
GND External accessory power supply and in ductive sensor ground (blue cable)
24 VAC external accessory power supply (photocells, radio, etc.)
SEC 24 VAC external safety device power supply present only during the operating cycle
WARNING LIGHT output 24 VAC 3W max
LIGHT
12V Inductive sensor positive power supply (brown cable)
IMP Inductive sensor input (black cable)
GND ANTENNA GROUND input
ANT ANTENNA SIGNAL input
Description
Protects the ACCESSORY and SAFETY DEVICE power supply outputs
Protects the control unit at the 230 VAC power supply input
Protects the flashlight output
Slow flashing in opening, turned off in pause, fast
flashing in closing.
Slow flashing in opening, turned off fixed in pause, fast
flashing in closing.
11
UK