Tinting Instructions; Dispensing From The Cylinder; Automatic Drip Control Piston - CPS COLOR COROB D50 Manual Del Usuario

12

5 TINTING INSTRUCTIONS

5.1 Dispensing from the cylinder

1) With the plunger set at the required measurement and the cylinder full, turn the spring
loaded valve handle (Ref. # 2) clockwise until it locks into position.
2) Push the plunger handle (Ref. # 1) down completely, in a smooth even motion.
3) Your full dispense is now complete.
4) Return the valve handle to the closed position by pressing the release button (Ref. # 3).
5) Repeat the charging and discharging process for the required strokes (total formula).
Continue with the next required colour.
6) When the entire paint order is complete, gently lower gauges to zero position.
DO NOT push gauge release button and allow gauges to drop down.
Lower manually to avoid damage.
Figure 5-1

5.2 Automatic drip control piston

Activation of the Automatic Drip Control Piston provides a small suction of air to clean the
dispense nozzle of any remaining colorant and ensures clean dispensing ports and greater
accuracy. The valve automatically works on each dispense.
5.3 Tinting instructions
1) Identify the colour you wish to supply, either by name or code number.
2) Refer to your color formula reference book for the tint formula and note the tint base
required.
3) Determine the formula required for the size of paint can being tinted.
Plunger Handle # 1
Handle # 2 Dispense Position
Figure 5-2
Handle # 2 Closed Position
Figure 5-3
COROB™ D50