6
2 UNPACKING
The dispenser has been carefully inspected and the pumps calibrated to measure colorant with a
high degree of accuracy.
It should be carefully examined upon arrival to determine that the unit shows no signs of freight
damage. If any parts are found to be broken or damaged, immediately contact the carrier and
arrange for an inspection of the concealed damage.
Claims for damage must be made by you, the consignee, and not the shipper. The carrier
accepts full responsibility for the safe delivery of merchandise upon pick-up from the shipper.
Please read all instructions before using the dispenser.
FLOOR STAND MODELS
Floor stand units shipped:
12 x
Assembled Canister and Pump Assembly Or
16 x
Assembled Canister and Pump Assembly Or
20 x
Assembled Canister and Pump Assembly Or
24 x
Assembled Canister and Pump Assembly
1 x
Floor stand
1 x
Adjustable tray and hardware
1 x
Agitator plate
1 x
Turn Table
1 x
Cover Plate
1 x
Crank Shaft
1 x
Bag of canister mounting screws
Check the contents as you unpack. If any parts are missing, contact your supplier as soon
as possible. Do not commence set-up until all required parts are available.
COUNTER TOP MODEL
Counter top units shipped:
12 x
Assembled Canister and Pump Assembly Or
16 x
Assembled Canister and Pump Assembly Or
20 x
Assembled Canister and Pump Assembly Or
24 x
Assembled Canister and Pump Assembly
1 x
Counter top
1 x
Agitator plate
1 x
Turn Table
1 x
Cover Plate
1 x
Crank Shaft
COROB™ D50