For Your Safety; Intended Use - Hazet-Werk 4794/5 Instrucciones De Uso

1. Owner's liability
This tool was developed and manufactured
according to the technical norms and stand-
ards valid at the time and is considered
to be operationally reliable. Nevertheless,
risks may arise when the tool is not used as
intended or is used in an inappropriate way
by unqualified personnel. Please make sure
that any person using this tool or carrying
out maintenance work carefully reads these
operating instructions and fully understands
all information given, before using the tool.
• Keep the operating instructions together
with the tool at all times.
• Any modification of the tool set is strictly
forbidden.
• All indications concerning setting values
and setting ranges must be observed.
These instructions are provided as
a guide only. Always make sure that
you have a copy of the appropriate
vehicle manufacturer's service instruc-
tions, or another appropriate manual
that provides the correct information
necessary to properly execute the work.
Maintenance work on engines must be carried out only by experienced mechanics.
14
2

For your safety

Operational reliability is only guaranteed if
the tool is used as intended in accordance
with the information in the operating instruc-
tions. In addition to the safety advice in these
operating instructions, the general safety
regulations, regulations for the prevention of
accidents and regulations for environmental
protection valid for the application area of this
device must be observed and respected.
• This tool is intended exclusively for use by
• The tool set may only be used if it is in good
• All safety equipment must always be within
• This HAZET tool set is intended for use on
• Incorrect use of the product tools or use
• Any deviation from the intended use and/or
• Any claims against the manufacturer and/
• Any personal injury or material losses
Always wear personal protective equipment.

2. Intended use

experienced mechanics.
working order.
easy reach and should be checked regular-
ly.
diesel and petrol engines e.g. timing belt
replacement.
whilst failing to comply with the safety
instructions can result in serious injury or
death.
any misapplication of the tool is not allowed
and will be considered as improper use.
or its authorised agents because of damage
caused by improper use of the tool are void.
caused by improper use of the tool are the
sole responsibility of the owner.