Mounting Base On A Wood Framed Wall; Mounting Pipe And Base Assembly - Kichler POLA Manual De Instrucciones

ASSEMBLY
6
| KICHLER.COM

Mounting Base on a Wood Framed Wall

1. Locate a wall stud secure and solid enough to hold the
weight of the base assembly. Carefully locate and mark
the center of the wall stud. If you do not have a solid
structural framing member at that location then you must
provide an adequate alternative for mounting the fan.
2. Place mounting bracket (4) against the wall centered with
the centerline of the wall stud and 4 holes.
3. Drill 4 holes on the wall and secure bracket to wall using 3
lag screws (2) and spring washer (3) provided.
If mounting on a concrete wall, be sure to locate a structurally
solid and secure location to hold the weight of the fan
assembly and use suitable concrete anchors (not provided) to
mount the base to the wall.

Mounting Pipe and Base Assembly

1. Put one end of the pipe (7) into the slot of the base.
2. Carefully insert the position knob (6) and tighten it to hold
the pipe.