Operating Instructions - Kichler POLA Manual De Instrucciones

OPERATING INSTRUCTIONS

1. Change the setting on the speed control to the desired
operating speed. The pull chain controls the fan speed as
follows:
• 1 pull - Low
• 2 pulls - Medium
• 3 pulls - High
• 4 pulls - Off
2. To change the tilting angle of the fan head, loosen the tilt
adjustment knob on the fan head joint, tilt the fan head to
the desired angle and tighten the pivot knob.
3. To make the fan oscillate, pull up on the oscillating knob
located on the bottom of the motor housing. To stop the
fan from oscillating, push down on the oscillating knob.
8
| KICHLER.COM
CLEANING
WARNING: Unplug from electrical supply source before
cleaning. After servicing, any safety device (including grills
and blades) must be reinstalled or remounted as previously
installed. Use soft damp cloth then wipe with dry cloth.
Do not use harmful cleaners.
Do not bend the blades.
If you should have any operation questions, contact us toll free
at 1-866-558-5706.