System Wall Plate - Kichler VASSAR Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING THE BASIC FUNCTION
WALL CONTROL SYSTEM WALL
PLATE
Select a location to install the Basic Function Wall Control System
Transmitter and Wall Plate.
Install the wall plate using an existing wall switch outlet box. Make
sure the electrical power is TURNED OFF at the main panel before
continuing.
Step 1. Remove the existing wall plate and the old switch from the
wall outlet box. Wire nut the BLACK leads (hot) together and push
back inside the outlet box. (Fig. 23)
Step 2. Install the wall plate on the existing wall outlet box using the
screws provided. (Fig. 24)
After installing the wall anchors, attach the wall plate with the
mounting screws to finish the installation.
Outlet box
Switch
Wall plate
Fig. 23
Outlet box
Wall plate
Switch
Screws
Fig. 24
52" VASSAR
Screws
LED | 17
TM

Publicidad

Tabla de contenido
loading

Tabla de contenido