Plasma Power Source Prof 180 Hqc - Item No 968; Plasma Power Source Prof 300 Hqc - Item No 969 - Cebora PLASMA PROF 180 HQC Manual De Instrucciones

2.7.2

Plasma Power Source Prof 300 HQC - Item no 969

The Plasma Prof 300 HQC is a constant current power source, 300 A max at a duty cycle of 100%
Duty cycle (X)
Cutting current (I2)
Output voltage (U2)
Rated no-load voltage (Uo)
IEC 60974-1 Rated supply voltage (U1)
Maximum current consumption (I1max)
Effective current consumption (I1eff)
Efficiency
Energy consumption in an inactive state
Cutting current (I2)
Output voltage (U2)
Rated supply voltage (U1)
CEBORA
CP455G
Effective current consumption (I1eff)
Max power consumption
Delayed fuse
Rated cooling power at 1 L/min at 25°C
Max pressure
Degree of housing protection
Net weight
Insulation
EMC classification
This equipment complies with IEC 61000-3-12 standard provided that the allowed maximum impedance Zmax of the
unit is lower or equal to 12 mΩ at the interface point between the user unit and the mains.
NOTE: Power source Item No 969 has a rated maximum current consumption I1max > 75 A and the reference standard
is therefore IEC 61000-3-14 as stated in chapter 1 of IEC 61000-3-12, Ed.2.
This equipment is compliant with requirements set out in standard IEC 61000-3-14.
100 %
300 A
160 V
355 V
3 ~ 50/60 Hz
230 V 400 V
132 A 76 A
> 85%
≤ 50 W
300 A
200 V
3 ~ 50/60 Hz
230 V 400 V
165 A 95 A
66 kVA (±10%)
200 A 125 A
1.7 kW
0.45 MPa
IP21S
450 kg
Class F
Category A
440 V
69 A
440 V
87 A
100 A
79/128