With Windows® 2000 - Brother P-Touch 9200DX Guía De Referencia Rápida

0 In the Install From Disk dialog box that appears, click
the Browse button.
A In the "Folders" box of the Open dialog box, specify
"d:\ptouch\driver\pt9200dx\win98" (where "d:" is
the name of the drive containing the P-touch Editor
CD-ROM), and then click the OK button.
B In the Install From Disk dialog box, check that
"d:\ptouch\driver\pt9200dx\win98" (where "d:" is
the name of the drive containing the P-touch Editor
CD-ROM) appears in the "Copy manufacturer's files
from" box, and then click the OK button.
C In the next Add Printer Wizard dialog box that
appears, select "Brother PT-9200DX", and then click
the Next button.
D The printer driver is copied onto the computer.
E A dialog box appears, allowing you to select the
PTCOM port where the PT-9200DX is connected.
Select "PTCOM1:" if the P-touch is connected to the
COM1 port, or "PTCOM2:" if the P-touch is connected
to the COM2 port, and then click the Next button.
F In the dialog box that appears, allowing you to check
the name of the printer, change the printer name if
desired, specify that this printer will not be the default
printer, and then click the Finish button.
G Remove the CD-ROM from the computer, select "Yes,
I want to restart my computer now.", and then click
the Finish button to restart the computer.
With Windows® 2000:
Installation should be performed in the following order:
(1) P-touch Editor Version 3.1
(2) Serial port monitor
(3) Printer driver
1 Insert the P-touch Editor CD-ROM into the computer's
CD-ROM drive. A dialog box that allows you to select
what to install automatically appears.
7