After you have designed a label layout using the P-touch Editor application, you can print it out to make a label.
Installing the tape cassette
1 Press down on the cover release button and lift open the tape compart-
ment cover.
2 If you are using a new tape cassette, first remove the stopper. (some
tape cassettes may not be installed with a stopper.) Make sure that the
end of the tape feeds under the tape guides.
3 Insert the tape cassette firmly into the compartment, making sure that
the entire back of the cassette touches the bottom of the compartment.
. When inserting the tape cassette, make sure that the ink ribbon
does not catch on the corner of the metal guide.
Be sure not to touch the print head.
4 Close the compartment cover, and then press the ON/OFF button to
turn on the PT-9200DX .
Using the PT-9200DX
End of the tape
Tape guide
29