With Windows® 98 - Brother P-Touch 9200DX Guía De Referencia Rápida

With Windows® 98:
The software and printer driver installation should be per-
formed in the following order:
(1) P-touch Editor Version 3.1
(2) Printer driver
1 Insert the P-touch Editor CD-ROM into the computer's
CD-ROM drive. A dialog box that allows you to select
what to install automatically appears.
If the dialog box does not automatically appear,
double-click "My Computer" on the desktop, double-
click the icon for the CD-ROM drive containing the
CD-ROM, and then double-click "Ptsetup.exe" to
display the dialog box.
2 To install both P-touch Editor Version 3.1 and the serial
printer driver for the PT-9200DX, click the top button
(P-touch Editor).
To install just the serial printer driver for the PT-
9200DX, click the bottom button (Printer driver). (If just
the printer driver is to be installed, continue with the
installation from step 5.)
(1) P-touch Editor Version 3.1 installation
3 Install P-touch Editor Version 3.1 according to the
procedure described in P-touch Editor Version 3.1
Installation on pages 20 through 21.
4 After installation of P-touch Editor Version 3.1 is
finished, install the printer driver as described below.
(2) Printer driver installation
5 In the Select Connection dialog box that appears,
select "RS-232C", and then click the Next button.
6
6 In the For a RS-232C connection dialog box that
appears, note the path to the PT-9200DX printer
driver, and then click the Finish button.
7 In the first Add Printer Wizard dialog box that appears,
click the Next button.
8 In the next Add Printer Wizard dialog box, which
allows to select whether the printer is a local or
network printer, select "Local printer", and then click
the Next button.
9 In the Add Printer Wizard dialog box that allows you
to select the driver, click the Have Disk button.