Installing The Pt-9200Dx Printer Driver; Selecting The Printer - Brother P-Touch 9200DX Guía De Referencia Rápida

8 When the dialog box appears, asking if you wish to
restart the computer, click the Quit button to continue
and install the printer driver.

• Installing the PT-9200DX printer driver

1 Double-click the Driver Installer icon in the P-touch
folder.
2 After the installer starts up, click the Select Driver
button.
3 In the dialog box that appears, select "PT-
9200DX(USB)" (for a USB port connection) or "PT-
9200DX(Serial)" (for a modem or printer port connec-
tion). The printer drivers with a check mark beside
them are installed.
Then, click the Install button.
4 Installation begins. When the installation is finished
and the following dialog box appears, click the Quit
button.
5 When the dialog box appears, asking if you wish to
restart the computer, click the Restart button to restart
the computer.
6 After the computer is restarted, turn on the P-touch.

• Selecting the printer

1 Pull down the Apple menu and select "Chooser" to
display the Chooser window.
2 In the list on the left, click the PT-9200DX(USB) icon
(for a USB port connection) or the PT-9200DX(Serial)
icon (for a modem or printer port connection). Then,
select the appropriate printer driver.
3 If the PT-9200DX(Serial) icon was selected, click the
icon for the port linked with PT-9200DX(Serial) from
the list on the right.
4 Close the Chooser window to confirm your settings.
23