Service: Warning To Technical Maintenance; Total Espressos; Brewed Services Per Keypad Counter; Technical Programming On Machines With Display - Expobar G-10 Manual De Mantenimiento

To reset this counter (reset litres counter):
1. The espresso machine must be in the ON Status.
2. Turn off the machine using the main switch.
3. Maintain pressed both button 2 short espressos and 2 long
espressos, and while pressing them, turn on the espresso
machine from the main switch.
6.2.3.

Service: Warning to technical maintenance

This counter shows the number of services brewed (individual brewed services) made by the machine.
How to access: From the counter "Litres" get to this counter by pressing the continuous brewing button.
To get out and get to the next menu, press the button of continuous brewing.
In the chapter "7.14 Maintenance cycle It can be programmed the number of
brewed services before the electronics give the warning to make the technical
maintenance.
To reset the counter (reset the service counter):
1. The espresso machine must be in the ON Status.
2. Turn off the machine using the main switch.
3. Maintain pressed both buttons 1 short espresso and 1 long espresso, and while pressing them, turn
on the espresso machine from the main switch.
6.2.4.

Total espressos

This counter adds up all the services brewed by the machine. Therefore, it
cannot be reset. It shows separately the total of espressos, and the total of
hot water services.
How to access: From the counter "Service", access to this counter pressing
the continuous button. To exit and proceed to the next menu, press the continuous button.
•
This counter constitutes a total brewed services history of the machine.
6.2.5.

Brewed services per keypad Counter

This counter shows the number of brewed services brewed by each of the
possible selections of the machine.
On the superior side of the display it is shown the dosis type (Espresso, long
espresso, 2 espressos, 2 long espressos, continuous or hot water). On the
right side it is shown which of the groups is now displayed. Underneath it is
shown the amount.
•
These counters can be reset as follow: While displayed on the screen the option described in the
chapter "Counters: Total expressos", press at the same time both buttons 2 short espressos and 2 long
espressos for more than 4 seconds.

7. Technical programming on machines with display

+

7.1. Access to the technical programming

The access to these adjustment menus is only possible from the left keyboard of the machine (left, facing the
machine).
With the machine in the stand by (OFF) state, keep pressed the continuous button for more than 15 seconds till
the display shows the following message: "Language: Engish" or "Lengua: Español".

7.2. Language: select language

When on the display it is shown: "Language:" and the selected language, we
can change the language used in the display. To change the current
language used, press one short espresso or one long espresso.
- Spanish – German - Italian – French - English
( - )(one long espresso)
To accept the selection made and proceed to the next menu, press the continuous button.
• Technical programming on machines with display
-
OK
(+)(one short espresso)
9
Nr. of litres
NºXXXXXX
Espressos
Nr Brewed
Dosis type brewed
-Next menu
-Stand by + >14s Tech. Progrm.
Litres
Service
Hot water
Nr Brewed
Gr X
Nr
Language
English
English