Harbor Breeze 40105 Manual De Usuario página 15

Ventilador de techo wakefield
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTIONS
24. Attach the switch housing (G) to the fitter plate (R)
by twisting the switch housing (G) until the loosened
switch housing plate screws (LL) engage the key
slots on switch housing (G). Re-install the third
switch housing plate screw (LL) into the closed hole
in the switch housing (G) and securely tighten all
three switch housing plate screws (LL).
Hardware Used
Switch Housing
LL
Plate Screw
25. Remove one of the switch housing screws (MM) from
the switch housing (G), and loosen (do not remove)
the other two. Connect the wire-pin connectors in the
switch housing (G) to the wire-pin connectors from
the light kit (H) -- black to black and white to white.
Hardware Used
Switch Housing
MM
Screw
26. Align the slotted holes in the light kit (H) with the
loosened switch housing screws (MM). Twist the light
kit (H) until the screw heads engage the keyslots.
Install the switch housing screw (MM) that was
previously removed into the closed hole in the light
kit (H) and securely tighten all three switch housing
screws (MM).
Hardware Used
Switch Housing
MM
Screw
24
R
x 3
25
G
x 3
H
26
x 3
15
G
LL
G
MM
MM
Lowes.com/harborbreeze
F
LL
G
G
H

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido