Set-Up Work - Rohm CAPTIS-M Traducción De Las Instrucciones De Servicio Originales

Plato porta pinza
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6

Set-up Work

122017 / 1.0
Warning
Crushing injuries and cuts due to start-up during set-up
work.
Flying parts may cause serious injuries.
Assembly and replacement of parts only in set-up
mode.
Limit speed in set-up mode.
Ensure that the machine cannot be put into operation
unsupervised.
No rotation without workpiece.
Wear personal protective equipment.
Risk of burns due to hot surfaces.
Burns on hands.
Do not touch the collet chuck CAPTIS-M when in
operation.
Allow the collet chuck CAPTIS-M to cool down before
carrying out necessary work.
Wear personal protective equipment.
Notice
Chuck key not removed.
Ejection of the chuck key.
Use safety key.
Always remove the chuck key directly after clamping /
unclamping.
Caution
Set-up Work
79

Publicidad

Tabla de contenido
loading

Tabla de contenido