Changing From External To Internal Clamping - Rohm CAPTIS-M Traducción De Las Instrucciones De Servicio Originales

6.2 Changing from External to Internal Clamping

Assembling ABSIS-C
1. Put machine into set-up mode.
2. Clean the mating surfaces of the collet chuck CAPTIS-M and of the
ABSIS-C.
3. If necessary, remove the inserted collet chuck, see Chapter 7.4
Replacing the Collet Chuck, page 85.
4. Insert the ABSIS-C and turn clockwise to lock.
 The ABSIS-C is locked in the collet chuck CAPTIS-M.
5. Insert and tighten the three screws.
ABSIS-C fitted.

122017 / 1.0
Set-up Work
81