Publicidad
Idiomas disponibles
Idiomas disponibles
74. Route the backup camera wire harness (2) though the
liftgate wire harness grommet (3) with the liftgate har
ness (1) to the point of connecting to the backup cam
era connector from the new lightbar. Attach to the ve
hicle wiring harness (1) with tie straps where neces
sary.
75. Back out the connector terminal locking tab from the
backup camera connector.
76. Insert the backup camera harness wires into backup
camera connector as follows:
a. 12V ignition power wire (PK/OR) cavity 2
b. Signal return wire (GY/OR) cavity 3
c. Signal wire (GY/LB) cavity 4
d. Shield wire (Bare) cavity 7
e. Ground wire (BK) cavity 5
77. Prepare the lightbar (1) for installation by taping the
license lamp connector (3) to the backup camera har
ness (2).
Feb 02, 2011
www.mopar.com
17
K6861161
Publicidad
