4
8. Using a trim stick C4755 or equivalent (1), gently pry
on one side of the connector (2) to remove.
9. Remove the retainers (1) from the Telematics Gate
way Module (TGM) (2) and pull out far enough to ac
cess the connectors on the back of the TGM.
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec
tor could damage the cable or radio.
10. Disconnect the antenna(s) (1), RF HUB and UCI ca
bles (4), video cable (3) and wiring connectors (2) from
the TGM.
11. Remove the TGM from the vehicle.
Feb 02, 2011
www.mopar.com
K6861161