Descargar Imprimir esta página

Mopar Journey Manual Del Usuario página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

24
NOTE: Seats removed for clarity.
106. Position the lower portion of the B­pillar trim (5) and
hand tap to secure the retaining clips.
107. Position the LH kick panel (2) and hand tap to secure
the retaining clips.
108. Position the LF door sill scuff plate (1) and hand tap
to secure the retaining clips.
109. Position the LR door sill scuff plate (not shown) and
hand tap to secure the retaining clips.
110. Connect the battery negative cable.
PARK VIEW REAR BACK­UP CAMERA VEHICLE CONFIGURATION
Vehicle VIN must be updated with the sales code of the added accessory in order to enable system functionality. Using
the DealerCONNECT website and the scan tool, complete the procedure below:
1. Log on to https://dealerconnect.chrysler.com
2. In the "Vehicle Option" screen under the "Global Claims System" category in the "Service" tab, enter the vehicle VIN
and add the sales code XAC (Park View Rear Back­Up Camera) as a "Dealer Installed Option".
3. Confirm that the new sales code has been successfully added to the VIN.
With the scan tool connected to both the internet (via Ethernet port or wireless connection) and the vehicle, follow the
steps below:
4. Using the scan tool select the VEHICLE PREPARATION and then select RESTORE VEHICLE CONFIGURATION.
5. Follow the step by step instructions on the scan tool to complete the Park View Rear Back­Up Camera vehicle
configuration.
Feb 02, 2011
www.mopar.com
K6861161

Publicidad

loading

Productos relacionados para Mopar Journey