Mopar Journey Manual Del Usuario página 5

NOTE: Seats removed for clarity.
12. Using trim stick C­4755 or equivalent, disengage clips
holding door sill scuff panel (1).
13. Starting at the forward end of the door sill scuff plate
(1), pull upward on the sill scuff plate in order to dis­
engage the clips (3) attaching sill scuff plate to door
opening flange (4).
14. Remove LF door sill scuff plate (1) from vehicle.
15. Remove the LR door sill scuff plate (not shown) the
same as the front.
16. Using trim stick C­4755 or equivalent, disengage
clips holding the LH kick panel (2) and remove the
kick panel.
NOTE: It is not necessary to remove the B­pillar trim,
only loosen for access to route the backup camera
wiring harness.
17. Using trim stick C­4755 or equivalent, disengage clips
holding the lower portion of the B­pillar trim (5) and pull inward to loosen enough to route the backup camera wiring
harness.
18. Open the liftgate.
19. Using trim stick C­4755, carefully pry the liftgate sill
plate out disengaging the retaining clips.
20. Remove the liftgate sill plate from the vehicle.
Feb 02, 2011
www.mopar.com
5
K6861161