Inner Lining - SCHUBERTH C3 PRO Manual Del Propietário

D. THE HELMET

13. INNER LINING

The replaceable inner lining of the C3 Pro is washable and ensures
both an excellent fit and improved ventilation of the helmet.
The high-comfort cheek pads ensure that the helmet fits
comfortably around the cheeks, and the headband pad provides
an optimal fit all around the head. The head pad sits comfortably
on the head without covering the ventilation channels (see
Section D. 14., Ventilation systems/Head ventilation).
The internal lining consists of skin-friendly materials throughout,
particularly in areas that come in contact with the head. These
are a soft, breathable COOLMAX
and moisture very well, a special noise-reducing Polygene
material with antibacterial properties and a sweat-absorbing
®
Interpower material.
Removing the lining
Note:
When removing the lining, the cheek pads must first be
detached before taking out the headband pad. When fitting
the lining, remember to insert the headband pad before the
cheek pads.
30
®
material that transports heat
®
Removing the lining
1. Undo the snaps on the front straps
of the neck collar and pull the
neck collar out of the mounting by
pulling strongly inwards.
-> neuer Text (Close-Up noch von Tim)
2. Undo the two rear snaps of the
cheek pads as well as rear crown
liner retention flap button.
31