Reflective Panels; Putting The Helmet On And Taking It Off; Putting On The Helmet 43 J - SCHUBERTH C3 PRO Manual Del Propietário

D. THE HELMET

Reflective panels

Together with the silver reflective strips located laterally at
the back of the neck pad, the two reflective panels integrated
into the left and right areas under the visor plate help make
the motorcycle rider more noticeable on the road, especially
in conditions of poor visibility. If the helmet is plain (no
decoration), the SCHUBERTH name also appears on the front and
back of the helmet in a reflective film.
Note:
Keep the reflective safety areas clean.
42
E. PUTTING THE HELMET oN AND TAKING
IT oFF
1. PUTTING ON THE HELMET
Note:
See section D.10. for operation of the chin-strap / fastener
system.
1. Open and lock the chin bar. Make sure the sun visor
is retracted into the helmet shell.
2. Open the chinstrap and chinstrap comfort pad.
3. Pull apart the lower ends of the chinstrap.
4. It will now be easy to put the helmet on.
5. Close the chinstrap comfort pad (with the Velcro fastener)
6. Fasten the chinstrap by pushing the ratchet tongue into the
lock so that you hear it engage properly.
7. Make sure the chinstrap passes under the chin and fits
snugly.
8. Swing the chin bar down until you hear both locks close.
9. Check that the chin section is securely locked by pressing it
up from below.
Note:
Regularly check that the chinstrap fits correctly and is
adjusted to the correct length (see section D.10.).
Caution:
Never ride with the chin bar raised!
43