Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 132

4. Control

Visually and mechanically check the equipment's functions before use.
Check the following details visually:
­
Check the line along its entire length. It must not show chafing or varying
thickness (10 mm). It must not show signs of major stress, such as frayed cuts,
change of shape, stiffness or other deformation with permanent kinks.
­
The equipment and karabiner must be in their original state. No cracks,
deformations, significant wear marks or limited functions.
Check the following details mechanically:
­
Pull the line through the device – three metres in each direction – finishing off
with the "rescue" line's karabiner approx. 30 cm from the device (NOTE that the
brake force must increase with increased pulling power on the line).
­
All moving/locking parts must show perfect function.
When used, the equipment must always be inspected by a CRESTO certified individual.
Faulty equipment, lines or components must never be reused. If the equipment is found to
be faulty during inspection, the component(s) must immediately be returned to a CRESTO
certified individual for further inspection. The inspection must be performed by a certified
expert with a minimum competence of a certified competent person.
The following conditions must be met during use in an emergency:
Lowering/one person =
Lowering/two persons =
High load descent =
Lifting/single person =
The equipment must be inspected and checked at least once every 12 months. The
inspection must be carried out by the manufacturer or an individual approved by the
manufacturer to carry out inspections and repairs.
NOTE: Several countries require inspection at 6-month intervals.
WARNING! Alteration or replacement of any of the equipment's components outside
the scope of equipment certification and this guide is strictly prohibited!
© CRESTO AB 2011
Maximum length: 150 m x 10 descents
Max. load per individual 140 kg
Maximum length: 150 m x 5 descents
Max. combined load e.g. 2x90=180 kg
Maximum length: 150 m only once!
Max. combined load 180 kg
Maximum height: Approx. 0.5 m pr. hoist
accumulated to max. 6 m
Max. load 140 kg (one person only)
vers. 2011 - 3 UK
+
and max. 280 kg
17.10.2011
5

Publicidad

Tabla de contenido
loading

Productos relacionados para CRESTO resq red pro

Tabla de contenido