Allegion Schlage NDE80 Instrucciones De Instalación Y Guía Del Usuario página 5

2
Align assembly and install on door.
Let the wire hang on the other side, through the hole.
Do not pinch ribbon cable!
Ensure that the lever catch pin is aligned with latch side
before continuing!
The latch tails must fit inside the slide and the latch prongs must fit into
the chassis. If the latch tails are not at the proper depth the door thickness
ring needs to be adjusted. See Door Thickness Adjustment.
Install Inside Assembly.
3
Install backplate first, then route ribbon cable.
Do not pinch ribbon cable!
Route cable through indicated space.
WARNING
WARNING
CAUTION
4
Install spring cage.
Align lever catch pin to door edge. Make sure the outside escutcheon is
square before tightening the bolts.
Lever Catch Pin
5
Install inside escutcheon.
5a Connect the cable from the outside escutcheon to the
connector on the inside escutcheon.
5b Place inside escutcheon on backplate, and slide down
to hook onto backplate. Secure with screws. Make sure
escutcheon and spring cage are properly aligned before
tightening screws
2
Actual Size
1
Actual Size
3