Smoke hollow DG1100S Manual Del Usuario página 21

30
Hardware Needed:
(4) #8-32x5/16" Screws
(4) #8-32 Nuts
31
Hardware Needed:
(2) Tapping Screws
57
32
Hardware Needed:
(1) 1/4-20x5/8" Screw
42
ASSEMBLY,
Fig. A
9
59
8#-32*5/16" 4 PCS
8#-32 螺母 4 PCS
Fig. B
5/32"-32 *8MM 2 PCS
5/32" 螺母 2 PCS
ENSAMBLAJE
Attach grease drawer tracks to the bottom
side of the grease tray (Gas Grill). Make sure
tracks are facing inward so grease drawer
59
58
to the bottom shelf (Fig. C). Attach HVR
Fig. C
STEP 30:
can sit in the tracks. (Fig. A)
(gas grill) over and
9
attach right drawer
stop and left drawer
stop to the grease
drawer as shown.
Attach the LP cylinder wire retainer
hose to left side shelf support
with the hose clamp as shown (Fig. D).
Fig. D
56
STEP 31:
Flip grease tray
(Fig. B)
STEP 32:
21