Cleaning The Drip Tray; Cleaning The Housing - Schaerer Coffee Club Guía Breve

5.5.5

Cleaning the drip tray

Danger of scalding
• Hot liquids could be in the drip tray.
• If the drip tray does not correctly engage,
for example after cleaning, there is a risk
of burns from hot fluids.
> Carefully move the drip tray.
> Reinstall it carefully so that no unintended
water leakage occurs.
> Always make sure the drip tray is
positioned correctly.
* Carefully life and remove the drip tray from the
front
* Remove the drip grid and clean with the cleaning
brush
* Thoroughly clean the drip tray
* Thoroughly clean the SteamJet outlet and cover
with the supplied cleaning brush
* Then rinse the drip tray and drip grid with pure
drinking water
* Dry the drip tray and drip grid, put them together
and reinsert
5.5.6

Cleaning the housing

• There is a risk that scratches or dents will
occur during cleaning.
> Do not clean with abrasive agents or
similar.
> Use only very mild cleaning products.
> Do not use strong alkaline, alcoholic or
degreasing cleaning products.
> Only use soft cloths for cleaning.
* Switch off the coffee machine using the on/off
switch.
* Allow the machine to cool off.
* Clean the housing of the cooled coffee machine
with a moist cloth.
* Rub dry using a fine wool cloth.
SCClub short instructions
Care | Manual cleaning
CAUTION
Observe the Safety chapter
w f rom page 57
IMPORTANT
Observe the Warranty chapter
w See operating insctructions
Note
There are problems with
resistance to alkaline cleaning
products, solvents such as
acetone, carbon, carbon
tetrachloride, paint thinner or
alcohol combinations > 5%,
ammonia, benzol, glycerine,
xylol, scouring agents,
degreasing washout solvents
and strong spray cleaners are
also not suitable
89